Keeping electronics on in standby mode
1. Select MENU > System Settings > Power & Thermal.
2. Select Keep Electronics on In Standby.
3. To enable keeping electronics on in standby mode, select Enter.
Enabling projector communication
The front and rear IR sensors receive transmissions from the IR remote. Keep the transmission path
to these sensors unobstructed for uninterrupted communications with the projector.
Alternatively, you can connect a wired version of the remote to the connector on the IMXB labeled
Wired Keypad.
1. Select MENU > Communications > Projector Communications.
2. To enable the front IR sensor, select Front IR Enabled and select Enter.
3. To enable the rear IR sensor, select Rear IR Enabled and select Enter.
4. To enable a wired version of the remote, select Wired Keypad Enabled and select Enter.
By default this feature is enabled.
5. To enable HD control for video signals, Ehternet, or IR, select HDBaseT Keypad Enabled and
select Enter.
Setting the remote access level
Determine if and how the projector can be accessed remotely.
1. From the home page, select MENU > Admin > Service.
2. Enter the service password.
3. Select Remote Access Level.
4. Select the appropriate remote access level:
•
No Access
•
Login Required
•
Free Access
5. Select Enter.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Configuring System Settings
24