Table of Contents
Advertisement
Setting up an integrated
media block
Configure the CineLife+ projector to work with a third-party Integrated Media Block (IMB).
Selecting Integrated Media Block (IMB)
preferences
Choose from the available options to set the type of Integrated Media Block (IMB).
1. To set the type of IMB, select Service Setup > Preferences.
2. Select IMB.
3. In the Type list, select from the available IMB models.
4. When the system prompts you to reboot the projector, select Reboot.
5. After the projector has restarted, log in with your user account.
Activating marriage
After selecting the Integrated Media Block (IMB) type, you must install the IMB and complete marriage
to display secure content and to comply with the Digital Cinema Initiatives (DCI) specification. You
cannot complete marriage remotely.
You cannot complete marriage remotely because you must select the Marriage button on the input
panel during the marriage process.
1. In the left navigation menu, select Service Setup > Marriage Setup.
2. Select Finish.
3. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.
Enabling Integrated Media Block (IMB) Powered
in Standby mode
Enable the projector to turn on the Integrated Media Block (IMB) and increase the air flow inside the
projector to cool the card cage electronics.
1. To set the type of IMB, select Service Setup > Preferences.
2. Select IMB.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
67
Advertisement
Table of Contents
