Setting The Wall Color; Setting The Wall Color Automatically - Christie Inspire Series User Manual

6. To confirm the selection, select ENTER.
7. To edit saturation of the primary color, adjust the slider or enter the color values of the primary
color component you selected until you are satisfied with the colors.
Saturation values reflect the color shifting away from the primary color or toward white.
8. To confirm the selection, select ENTER.
9. To edit gain of the primary, adjust the slider or enter the color values of the primary color
component you selected until you are satisfied with the colors.
Increasing value indicates increasing the lightness, and decreasing the value indicates
decreasing it to black.
10. To confirm your selection, select ENTER.
11. Repeat steps 3 to 9 for each primary color component, except white.
12. To edit the color of white by three components—red, blue and green—adjust the slider or enter
the values until you are satisfied with the white.
13. To confirm your selection, select ENTER.
14. To reset the primary colors to their defaults, select Reset to Default.
15. To reset back to default setting, select ENTER.

Setting the wall color

Set the wall color so the projector can enhance the color performance customized for the specific
wall.
1. Select Menu > Image Settings > Color Matching > Wall Color.
2. Select the preferred setting:
• White
• Gray 130
• Light Yellow
3. Select ENTER.

Setting the wall color automatically

Set the wall color automatically so the projector can enhance the color performance customized for
the specific wall.
• Auto wall color option is disabled and grayed out if the picture mode is set to 3D or High Frame
Rate with the current source or change to no source status. (The camera does not support 1x color
wheel speed.)
• Auto wall color option is also disabled and grayed out if the camera is not detected.
1. Select Menu > Image Settings > Color Matching > Auto Wall Color.
2. Select ENTER.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
46