Read/Write
Read only.
Examples
Command
(SKS0)
(SKS1)
(SKS2)
Timing Detect Mode (TMG)
Use this command to set the timing detection mode to wide or normal.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(TMG0)
(TMG1)
Service Commands
This section lists projector service commands.
Color Wheel Index Setting (CWI)
Use this command to set the color wheel index speed. This command can only be run when the
projector is in service mode.
Subcode
Subcode
SPX2
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Changes the hot key source.
Returns a list of all sources.
Allows source changes with the Auto button.
Sets the timing detection mode to normal.
Sets the timing detection mode to wide.
Sets the color wheel index speed to 2x.
Description
Description
Description
Commands
56