9. To confirm your selection, press ENTER.
10. Repeat steps 3 to 9 for each primary color component, except white.
11. To edit the color of white by three components—red, blue and green—adjust the slider or enter
the values until you are satisfied with the white.
12. To confirm your selection, press ENTER.
13. To reset the primary colors to their defaults, select Reset to Default.
14. To reset back to default setting, press ENTER.
Setting the wall color
Set the wall color so the projector can enhance the color performance customized for the specific
wall.
1. Select Menu > Image Settings > Color Matching > Wall Color.
2. Select the preferred setting:
•
White
•
Gray 130
•
Light Yellow
3. Press ENTER.
Adjusting advanced image settings
Adjust the color value based on gamma, white peaking, color temperature, and save user settings
for data recovery.
Adjusting the color value based on gamma setting
Adjust the color values to give a more detailed displayed image.
1. Select Menu > Image Settings > Advanced Image Settings > Gamma.
2. Select appropriate option:
•
Video
•
Film
•
Bright
•
CRT
•
DICOM
3. Press ENTER.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
45