Projector Color Adjustment (Pca) - Christie Mirage WQ-L User Manual

Projector Color Adjustment (PCA)

PJH
Unsaved
CONTROL GROUP:
Description
Allows ArrayLOC projector-specific color adjustments ("tweaks") to be set. Subcodes ROxR - BOxW have a small
'x' listed. The small 'x' represents the color table being edited.
Different color tables, denoted by 'x' - replace 'x' with the following: 
S = SD table (Read Only) 
H = HD table (Read Only) 
M = Max drives (Read Only) 
E = Rec 709/EBU (Read Only) 
F = Factory drives (Read Only) 
1 = user table 1 
2 = user table 2 
3 = user table 3 
4 = user table 4 
C = current user table
Subcode
ROxR
GOxR
BOxR
ROxG
GOxG
BOxG
ROxB
GOxB
BOxB
ROxW
GOxW
BOxW
CLRA
RSTL
RSTA
SAVE
WBAJ
COPY
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Down
SUBCLASS:
Description of Use
Adjusts the red part of red. Range 1 - 2000. Expressed with
one decimal point (Range is 0.1 - 200.0).
Adjusts the green part of red. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the blue part of red. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the red part of green. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the green part of green. Range 1 - 2000. Expressed
with one decimal point (Range is 0.1 - 200.0).
Adjusts the blue part of green. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the red part of blue. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the green part of blue. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
Adjusts the blue part of blue. Range 1 - 2000. Expressed with
one decimal point (Range is 0.1 - 200.0).
Adjusts the red part of white. Range 1 - 2000. Expressed with
one decimal (Range is 0.1 - 200.0).
Adjusts the green part of white. Range 1 - 2000. Expressed
with one decimal (Range is 0.1 - 200.0).
Adjusts the blue part of white. Range 1 - 2000. Expressed with
one decimal (Range is 0.1 - 200.0).
Clear the current adjustments.
Reset the current adjustment to factory defaults.
Reset all adjustments to factory defaults.
Saves current set of adjustments as factory defaults.
White Brightness Adjustment
Copy data setting from a referenced table to the selected one.
Serial Command Reference
Operator
ACCESS LEVEL:
92