Cca-Color Adjustment - Christie Boxer 4K Technical Reference

(BST 0)
Result:
(BST!000 "--OK--")
Example of failed tests within the All Tests test suite:
(BST 0)
Result:
(BST!001 "Fail" "no response on pin 1")
(BST!002 "Fail" "no additional details")
(BST!000 "Fail")
Example of failing test 1:
(BST+TEST 1)
Result:
(BST+TEST!001 "Fail" "no response on pin 1")
CCA–Color Adjustment
Configures the color adjustments for the projector.
Use this command to also set the native colors for the projector.
Commands
Command Description
CCA+SLCT <value> Sets the color table. This command is only available if
the video electronics are on. (Saved value)
CCA+CTMP <value> Sets the color temperature of the projector.
This command is only available if the video electronics
are on, the projector is configured to use Color
Temperature for its color table, and Color Temperature
is selected. (Saved value)
CCA+RDCX <x Defines a custom color table using x,y coordinates,
coordinate for red> scaled by a factor of 10,000. For example, an x value of
3350 corresponds to x=0.3350 in the CIE 1931
CCA+RDCY <y
chromaticity scale.
coordinate for red>
This command is only available if the video electronics
CCA+GNCX <x
are on and Custom is selected. (Saved value)
coordinate for
green>
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 = Max Drives—Turns off all
color adjustments, projector
runs at maximum brightness
1 = Color Temperature—Selects
color adjustments based on a
color temperature
2 = HD Video (ITU-R BT.709)
3 = Custom settings
3200 to 9300
The valid range for each value
depends on which of the red/
green/blue point is being
adjusted.
17