Replacing Fan 8 - Christie HS Series Service Manual

4. Detach the 3M tape .
5. Remove the fan harnesses from the clips.
6. To separate the affected fan from the right-side cover, remove the corresponding four M3
screws with a Phillips #1 screwdriver.
7. Replace the affected fan.
8. To re-install the fan modules, follow these steps in reverse order.

Replacing fan 8

The fan 8 provides air cooling for power supply module.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board and main board bottom shielding.
See Replacing the main board and media board
3. Remove the rear cover.
See Removing the rear cover
4. Remove the front cover.
See Removing the front cover
5. Remove the left side cover.
See Removing the left-side cover
6. Disassemble the shielding cover on the left of the power supply.
See Replacing the DC 12V power supply
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
Fan 4 Fan 5 Fan 6
on page 64.
on page 99.
on page 64.
on page 65.
on page 67.
on page 87.
Ventilation and cooling
Fan 7
73