Cle-Color Enable; Csp-Color Space - Christie Boxer 4K Technical Reference

Reset values to "HD Video (ITU-R BT.709)":
(CCA+COPY 2)
Change the x-coordinate of the custom color table to 0.6753:
(CCA+RDCX 6753)
Save the current color primary settings as the new calibrated defaults:
(CCA+SAVE)
Reset the color primary settings to the saved calibrated defaults:
(CCA+RSET)
CLE–Color Enable
Enables specific colors in the video path.
Commands
Command Description
CLE <color> Enables specific colors in the video path. This command
is only available if video electronics are on.
CSP–Color Space
Changes the color space of the active signal for all inputs on the screen.
Commands
Command Description
CSP <color space> Changes the color space of the active signal
on the screen. This command is only
available if video electronics are on. (Saved
value)
Examples
Set the color space to RGB irrespective of which channel is selected:
Boxer 4K Serial API Commands Technical Reference
020-101697-05 Rev. 1 (07-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 = White
1 = Red
2 = Green
3 = Blue
4 = Yellow
5 = Cyan
6 = Magenta
Values
0 = Auto Detect—Uses the detected
colorspace in the active signal. (Default)
1 = RGB (full range)
2 = RGB (limited range)
3 = YCbCr HDTV (ITU-R BT.709)
4 = YCbCr HDTV (expanded range)
20