Cle-Color Enable; Csp-Color Space - Christie Boxer 30 Technical Reference

(CCA+RDCX 6753)
Save the current color primary settings as the new calibrated defaults:
(CCA+SAVE)
Reset the color primary settings to the saved calibrated defaults:
(CCA+RSET)
CLE–Color Enable
Enables specific colors in the video path.
Commands
Command Description
CLE <color> Enables specific colors in the video path. This command is only available
if video electronics are on.
Examples
Display the red portion of image only:
(CLE 1)
Display the blue portion of image only:
(CLE 3)
CSP–Color Space
Changes the color space of the active signal for all inputs on the screen.
Commands
Command Description
CSP <color space> Changes the color space of the active signal
on the screen. This command is only
available if video electronics are on. (Saved
value)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = White
1 = Red
2 = Green
3 = Blue
4 = Yellow
5 = Cyan
6 = Magenta
Values
0 = Auto Detect—Uses the detected
colorspace in the active signal (Default)
1 = RGB—full range
2 = YCbCr HDTV (ITU-R BT.709)
3 = RGB—limited range
4 = YCbCr HDTV—expanded range
23