Auto Color Enable (Ace); Address (Adr) - Christie Mirage WQ-L User Manual

Auto Color Enable (ACE)

ACE
Preference
CONTROL GROUP:
Description
Automatically select Color Enable based on the control being adjusted. If enabled, this control allows the projector
to automatically change the color enable control. This is an unsaved control, which can only be set when powered
On.
Subcode
<No Subcode >
Examples:
(ACE 0) Disable Auto Color.
(ACE 1) Enable Auto Color.

Address (ADR)

ADR
Preference
CONTROL GROUP:
Description
Set/Query Device Address on ASCII Protocol network. Required only for RS232 connections that are daisy chained
to allow directed messages.
Subcode
<No Subcode >
Examples:
(65535 ADR 0) Set all devices to address 0. 
(0 ADR 5) Set first device at address 0 to address to 5. 
(65535 1001ADR?) Query address for all devices and return results to address 1001. 
Expected response to previous query (01001 00005ADR!005).
Mirage WQ-L User Manual
020-101372-01 Rev. 1 (04-2014)
Power Up
SUBCLASS:
Description of Use
Enable/Disable auto color controls.
Power Down
SUBCLASS:
Description of Use
Valid Address range is 0 to 999. Reserved broadcast address is
65535.
Serial Command Reference
Operator
:
ACCESS LEVEL
Operator
ACCESS LEVEL:
75