ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
104
Confidential and Proprietary Information of ZTE CORPORATION
<interface-number>
This example describes how to set the interface fei_4/1 to trust
mode.
ZXR10(config)#ip dhcp snooping trust fei_4/1
ip dhcp snooping binding
ip dhcp snooping clear
ip dhcp snooping enable
ip dhcp snooping vlan
Use this command to enable DHCP SNOOPING of the specified
VLAN.
Global configuration
ip dhcp snooping vlan <vlan>
no ip dhcp snooping vlan <vlan>
<vlan>
This command takes effect only if DHCP SNOOPING is configured
as ENABLE in global configuration mode.
This example describes how to enable DHCP SNOOPING of VLAN10
in global configuration mode.
ZXR10(config)#ip dhcp snooping vlan 10
ip dhcp snooping binding
ip dhcp snooping clear
ip dhcp snooping enable
ip dhcp snooping information option
ip dhcp snooping information format
ip dhcp snooping information policy
ip dhcp snooping vlan
ip dhcp user quota
Use this command to set the DHCP user quota on the interface,
that is, the maximum number of DHCP Clients on the interface.
This command is always valid to the DHCP server process, and is
Physical interface No., such as fei, gei, and
smartgroup
VLAN of users, 1~4094, a range can be
entered.