Managing Data Usage - Zte MC8010CA User Manual

Managing Data Usage

When the Smart Hub is connected to the Internet via cellular (that is the
Smart Hub is in Bridge mode or Wireless broadband mode), you can check
and manage mobile data use and get data warnings.
1. Click Data usage on the 5G CPE home page.
2. Select Enable to the right of Data management to use the feature.
3. Set the following available options.
 Clear data: When enabled, the Smart Hub will reset the used data
to zero at the date of every month you set in Clear date.
 Data plan type: Select the data plan type. You need to set the total
amount of your data plan and the warning level (in percentage).
4. Click Apply.
NOTES:
•
When the used data or time reaches your specified percentage, you can
get a warning message on the 5G CPE web page.
•
If the amount of used data/time differs from the carrier's accounting, you
can manually calibrate the number in the Data usage or Used time box.
•
The data usage is measured by your Smart Hub, and your carrier's data
accounting may differ.
20