Ip Discard Undeliverable; Iptv - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Example
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
Purpose
Command Mode
Syntax
Syntax
Description
32 Confidential and Proprietary Information of ZTE CORPORATION
This example shows how to enable the dynamic ARP detection
function of DHCP on Superqinq1.
ZXR10(config)#interface superqinq1
ZXR10(config-if)#ip arp inspect
show running-config

ip discard undeliverable

Use this command to set whether to send the route-less packets
on the interface for protocol processing. Restore the default with
the no command.
Interface configuration

ip discard undeliverable

no ip discard undeliverable
No sending is made.
It is applied only to ZXR10 GER.
This example describes how to set to send the route-less packets
on the interface for protocol processing.
ZXR10(config)#intrface fei_3/1
ZXR10(config-if)#no ip discard undeliverable

iptv

Use this command to configure an IPTV rule on an Layer 2 inter-
face.
Interface configuration mode
iptv vlan {<vlan-id>|<vlan-name>}[ max-access < max-acc
ess -num>| packet {name <package-name>| id-list <id-list>}|
cdr {enable | disable}{name <channel-name>| id-list <id-l
ist>}|{deny | permit | preview | query }{ start | pause |
resume | remove }{ package | channel }]
no iptv {vlaln {<vlan-id>|<vlan-name>}{ max-access |
packet {name <package-name>| id-list <id-list>}}
<vlan-id>
<vlan-name>
<package-name>
< max-access -num>
<id-list>
VLAN ID, in the range of 1~4094
VLAN name, with 1~31 characters
Packet name, with 1~32 characters
The maximum channel-access number
Package ID list, in the range of 0~127
Channel ID list, in the range of 0~2047