Applying Port Binding Configuration Example; Configuring Sip Service - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
104 Confidential and Proprietary Information of ZTE CORPORATION
Command Illustration:
Command policy show can be used to view ID of policy.
4. Clearing all application protocol port binding policies.
Command
ZXR10_FW.dpi #policy clean
5. Showing all application protocol port binding policies.
Command
ZXR10_FW.dpi #policy show
6. Restoring default application protocol port.
Command
ZXR10_FW.dpi #policy reset
Applying Port Binding Configuration
Example
To bind HTTP packets sent to subnet 192.168.0.0/255.255.0.0 with
destination port 8080, execute the following command:
ZXR10_FW.dpi# policy add name http net 192.168.0.0
mask 255.255.0.0 protocol tcp port 8080
To delete one application protocol port binding policy whose id is
8547, execute the following command:
ZXR10_FW.dpi# policy delete id 8547
To modify port id of FTP packets in port binding policy whose id is
8182 to 2121, execute the following command:
ZXR10_FW.dpi# policy modify id 8182 name ftp
net 0.0.0.0 mask 0.0.0.0 protocol tcp port 2121

Configuring SIP Service

Session Initiation Protocol (SIP) is a signaling control protocol of
application layer .
This topic describes how to configure SIP service.
Function
This clears all
application protocol
port binding policies.
Function
This shows all
application protocol
port binding policies.
Function
This restores default
application protocol
port.