Fresh Gases Exit - To And Fro Patient Circuit - Siare Morpheus Series User Manual

6.3.4 Fresh gases exit – TO and FRO patient circuit
WARNING! Risk of injury for the patient.
Do not connect the patient directly to the fresh gases exit without an
adequate ventilation circuit with pressure relief system.
If the patient is connected to the fresh gases exit without an adequate
ventilation circuit with pressure relief system, there will be an high
pressure dangerous for the patient.
Apply to the TO and FRO patient circuit to
the anaesthesia unit as shown in the
picture.
Select on ventilator: MAN operative mode.
To activate the TO and FRO patient circuit act
on the fresh gases exit selection control:
enabling of the exit of fresh gases exit
connector (AUX).
User's Manual, DU3310103-MRI / rev.3 - 02.05.2019
Preparation to use
6-17