Connection Of Medical Gas Supply To Cylinders ( Optional ) - Siare Morpheus ND User Manual

WARNING !! Risk of power failure
•
•
•

4.3.2 Connection of medical gas supply to cylinders ( optional )

•
Screw the gas supply hoses to the connectors of the cylinders pressure reducers.
•
Ensure that all the gas supply hoses are connected and work correctly: the cylinders hoses are
supplied with the screw connector DISS type.
We suggest you to install on reducers the same inlets used on the distribution
system so as to make switching from one system to the other safe and quick (at
least for oxygen).
WARNING !! Risk of gas power failure
In case of failure of the hospital's medical gas distribution system, the cylinders will
supply a reserve gas supply.To avoid a complete gas power failure, the cylinders
must always remain near the anaesthesia unit, with the pressure reducers closed.
WARNING !! Risk of explosion
•
•
WARNING !! Risk of gas power failure
•
•
•
Morpheus_ND
If all the gas supply hoses are not correctly connected, the anaesthesia unit will
not be available in case of gas supply failure.
Ensure that all supply hoses are connected according with the indication
engraved on the gas inlet bloc and the relative illustrations.
After the hoses connections, verify that the anaesthesia unit is correctly working.
If the pressure reducers for O
grease, there is the risk of explosion.
Do not apply oil or grease on the O
touch with fingers soiled with oil or grease.
Connection on the same connector of the gas supply anesthesia unit from the
cylinder and the hospital gas plant.
If the cylinder pressure reducer is open during operation with the medical gas
distribution system of the hospital, there is the danger of undesired erogation of
medical gas from reservoir cylinders.
Close the cylinder pressure reducer in case the hospital medical gas distribution
system is sufficient.
are touched with fingers/hands soiled with oil or
2
cylinders pressure reducers and never
2
4-7