Calibratrion Programs " Displaying - Siare Falco 202 User Manual

4.13.2 " CALIBRATRION PROGRAMS " displaying


Set the main switch (placed on the back of the
ventilator) to "I".

Make sure that on the ventilator keyboard (operator
commands area) the green led (that indicates the
presence of mains power supply) is on.

In sequence, keep pressed for a few seconds the
ALARM RESET and ON-OFF soft keys to start up
the ventilator.

The " CALIBRATION PROGRAMS " is displayed
4-56
WARNING!! Patient / operator injury hazard
The different colour of the message VTEc ON (yellow) - VTEc OFF (white)
indicates if the function is ENABLE (black) or DISABLED (white).
If the user or the authorized technician does not activate or disable any
CALIBRATION PROGRAMS, after a few seconds, the system switches
automatically to " SELF TEST " phase.
User manual, DU3222102