Fixing the Paper on the Stacker Bin (only when the shifting job is
executed)
After the paper is delivered on the Stacker Bin, it is held and fixed by the actuator on the
Sheet Clamp Shaft. When the trailing edge of the delivered paper passes the Finisher Exit
Path Sensor, the actuator releases the fixed paper. When the next paper is delivered to the
Stacker Bin, the actuator holds and fixes the paper again with certain timing. This series of
actions is repeated every time the shifting job is executed.
Fig 2-6 Fixing Paper on the Stacker Bin
Paper Stopper Components
Sheet Clamp Shaft
The rotation of the Sheet Clamp Shaft drives three actuators on the Sheet Clamp Shaft,
which hold and fix the paper stacked on the Stacker Bin.
Volume 6 / Finisher - General Information
6-633