Unloading The Stacker During Printing - Xerox DocuPrint 65 Operator's Manual

Operator Guide

Unloading the Stacker during printing

DocuTech 65/DocuPrint 65
Staple placement
For information about the limitations of portrait and landscape staple
placement, refer to the Staple Placement table below.
Table 1-1. Staple placement
Edge Feed Portrait
Orientation Staple
Long
Long N/A
Short FAULT
Short FAULT
Short FAULT
If it is necessary to unload the Stacker during printing, use the following
procedure:
1. Press the Finisher button.
2. Wait for the printer to finish producing the set being printed.
3. Wait while the Stacker Tray is automatically lowered.
4. Unload the Stacker Tray.
5. Press the Finisher button again to continue operations.
Dual
Landscape Portrait
Staple Staple
FAULT FAULT
N/A N/A
Product overview
Dual
Landscape
Staple
N/A
FAULT
FAULT
FAULT
1-13