<
3-12
Configuring the Interface Card
The device address switch set to device address
switch is set to address 5 in the illustration
Step 4.
Connect all twinaxial cables.
Step 5.
Switch on the printer.
PRINTING THE OTHER I/O LOG
To print the Other I/O Log, press the Test
button on the interface card (refer to Figure
3-6 for side views of the Twinax and Coax
Figure 3-6.
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
1 Twinax Test
Twinax/Coax Interface Card Test
cut top 2"
2 Coax Test
cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII