Set Time & Date And Upload To The Sl2100; Repeat Wizard Or Finish - NEC SL2100 Quick Install Manual

Configure the SL2100
Set Time & Date and Upload to the SL2100
Click Set Time and Date
to set the system
to the correct time and date.
Click Upload, modified items
Then select the Upload Data icon
Ensure Select All is ticked and
Click Start to begin uploading the
changes to the SL2100 system, the progress bar will show when this is complete (should take less than 30
seconds).
Click Close when finished.

Repeat Wizard or Finish

If you've uploaded your changes then click Disconnect
to finish.
PCPro will disconnect from the SL2100 system.
Each time you run the wizard it will effectively start with a new configuration, any other wizard settings within the
SL2100 will be overwritten.
Quick Install Guide – SL2100 with Analogue Trunks rev 1.1
29