How To Slidet1100 As Chassis Out From Frame; Figure 62: T1100 As Chassis Front View - Tekelec 1100 Hardware Manual

Field Replaceable Units
By removing the chassis from the frame and placing it on a workbench (see
T1100 AS Chassis from a Frame
This method must be used to access theT1100 AS chassis for replacement
This method may be used to access one or more of the following:
Fan assembly
Hard drive assembly
Removable media drives assembly
PCI cards

How to SlideT1100 AS Chassis Out from Frame

The following FRUs can be replaced without removing theT1100 AS chassis entirely out of the
frame:
Fan assemblies
Fan filters
Hard disk drive assemblies
Removable media disk drives assembly
PCI cards
Power Supply Modules
show me: To view a video (with sound) that shows some steps of the following
procedure,
sure to read all the steps in the following procedure. For more information about
how to view this video, see
4.
WARNING: Always wear an ESD wrist strap grounded to the bench or frame when
working on electronic components.
1. From the front of the frame, remove the # 12-24 Phillips screw from each chassis retention
bracket (see

Figure 62: T1100 AS Chassis Front View

the frame adapter brackets.
Figure 62: T1100 AS Chassis Front View
106
on page 108)
click here. For personnel safety and to protect equipment and data, be
Programs Needed to View Linked Documents
on page 106). Do not remove the screws in
910-2969-001 Revision K, June 2009
Hardware Manual
How to Remove
on page