Table of Contents
Advertisement
ELAP or EPAP Network Integration
Table 17: Serial Port Assignments for MPS Servers A and B
assignments for MPS Servers A and B
Table 17: Serial Port Assignments for MPS Servers A and B
MPS
Server
A
B
Modems
Dial-in Capability
MPS Server B is configured for a modem on
PPP (TCP/IP). With this capability, multiple networked applications can run across the PPP link
simultaneously. PPP also requires two IP addresses to be registered, one to the serial port on the
server, and one to be assigned to the client dialing into the server. These IP addresses are allocated
on the synchronization network.
The remote dial-in serial port will be configured as follows:
154
Serial Port Name
ttya
ttyb
ttya
ttyb
term/a000
term/a001
term/a002
term/a003
term/a004
term/a005
term/a006
term/a007
port a001 on the 8-Port Connector Box and supports
Hardware Manual
on page 154 depicts the Serial Port
Serial Port Use
Console
MPS
Server B Console monitor
Console
MPS
Server A Console monitor
Connection for local
provisioning terminal
Dial in modem connection
Connection to EAGLE for
EAGLE testing/configuration
Used to monitor upper power
distribution panel
Used to monitor lower power
distribution panel
Reserved, currently configured
for local provisioning terminal
Reserved, currently configured
for local provisioning terminal
Reserved, currently configured
for local provisioning terminal
910-2969-001 Revision K, June 2009
Advertisement
Table of Contents
