Network Assumptions - Tekelec 1100 Hardware Manual

ELAP or EPAP Network Integration
Interface
Function
Main DSM
Network
Backup DSM
Network
Backup DSM
Network
Sync Network
Sync Network
* These are generally visible outside of the immediate MPS area and they will pass through routers
and firewalls

Network Assumptions

The MPS network route and gateway implementation conforms to the following:
Four individual networks are required. Three of these networks are internal to the MPS system
and should not need to be changed.
MPS is configured to listen for Routing Information Protocol (RIP) broadcasts but does not
send out any routing updates.
Individual interfaces are configured with default IP addresses at the time of EPAP or ELAP
initialization. IP addresses are assigned as part of the manufacturing procedure and can be
150
Speed
Protocol Netra
Tekserver
TCP/IP 10/100BaseT
Gigabitt
TCP/IP 10/100BaseT
Gigabitt
TCP/IP 10/100BaseT
Gigabitt
TCP/IP 10/100BaseT
Gigabitt
TCP/IP 10/100BaseT
Gigabitt
Hardware Manual
Assigned to Assigned to
(Netra/Tekserver) (Netra/Tekserver)
MPS Server B MPS Server B
(qfe0 (qfe0 port
port/interface interface eth1)
eth1)
MPS Server A MPS Server A
(qfe1 (qfe1
port/interface port/interface
eth2) eth2)
MPS Server B MPS Server B
(qfe1 (qfe1
port/interface port/interface
eth2) eth2)
MPS Server A MPS Server A
(qfe2 (qfe2
port/interface port/interface
eth3) eth3
MPS Server B MPS Server B
(qfe2 (qfe2
port/interface port/interface
eth3) eth3
910-2969-001 Revision K, June 2009