Table of Contents
Advertisement
About This Manual
a) Base chassis part number, serial number, and CLEI (in the middle of label)
b) Software applications (at the left side of label)
c) Part number, serial number, and CLEI for both Hard Disk A and Hard Disk B (at the right
side of label).
Report whether the replacement chassis is to also contain replacement hard drives. These
numbers are needed in either case:
If the replacement chassis does not need to contain replacement hard disk drives, Tekelec
manufacturing will use these numbers to create the new base unit/hard disk label and
apply it to the replacement chassis
If the replacement chassis does need to contain replacement hard disk drives, Tekelec
manufacturing will use these numbers both to install replacement hard disk drive
assemblies in the chassis and also to create the new base unit/hard disk label and apply
it to the replacement chassis
7. To ensure that the replacement chassis has the same memory configuration as the failed chassis,
supply all the requested information from the stickers on the memory label (see
Memory Label onT1100 AS Chassis
Figure 18: Memory Label onT1100 AS Chassis
26
on page 26).
Hardware Manual
910-2969-001 Revision K, June 2009
Figure 18:
Advertisement
Table of Contents
