Chapter 5: How To Install Hardware In An Existing Frame - Tekelec 1100 Hardware Manual

How to Install Hardware in an Existing Frame
Topics:
Introduction.....70
How to Unpack and Conduct Inventory.....70
How to Install an Individual T1100 AS
Unit.....71
How to Cable Components Added to Existing
Frames.....81
This chapter describes how to install an individual
T1100 AS unit into a frame that has already been
installed. This chapter covers both:
Adding a T1100 AS unit into a heavy duty
frame that already contains from 1 to 4 T1100
AS unit in a DC environment
Installing a single T1100 AS unit into a
customer's frame in an AC environment.
Chapter
5