Introduction; How To Unpack The T1100 As Frame And Conduct Inventory; How To Install A T1100 As Frame - Tekelec 1100 Hardware Manual

How to Install aT1100 AS Frame

Introduction

This chapter decribes how to unpack and install a heavy-duty frame that contains from one or
more T1100 AS units and associated equipment in a DC environment.
Note: Some of the figures in this section show the Tekelec T1000. The T1000 is identical in size to
the T1100, and the frame installation instructions are the same for both chassis.
For information about installing a T1100 AS unit in an AC environment and about installing an
additional T1100 AS unit into a heavy-duty frame that already contains from one to four T1100
AS units, see How to Install Hardware in an Existing Frame
Note: The total number of T1100 AS units allowed in a frame depends on the application. For
more complete information about the maximum configuration allowed by the application, refer
assembly drawing.
to the

How to Unpack the T1100 AS Frame and Conduct Inventory

When the T1100 AS hardware system frame arrives, perform the following procedure:
1. Unpack the heavy-duty frame , using the procedure described in 822-0094-02.
2. Ensure that all the parts listed on the packing list have been received.
3. Ensure that the part numbers on the labels on the left and right sides of each T1100 AS unit
match the sales order for each of the following categories:
a) Base configuration for hard disk
b) Installed memory information
c) PCI card configuration
For information about the fields on a label, see
on page 24.
4. Be sure to return the frame's shipping container, as described in 822-0094-02.
5. This procedure is complete.

How to Install a T1100 AS Frame

A Heavy Duty (HD) frame is a specific Tekelec frame that has a specific footprint. It should not
be confused with other 19- or 23-inch standard frames.
To install and anchor a heavy duty frame, perform the following tasks:
How to Prepare the Floor for Heavy Duty Frames
How to Anchor the HD Frame to the Floor
Note: The anchoring procedure and the anchor assembly to use depend on the type of floor
on which the frame is to be installed.
54
on page 69.
T1100 AS Chassis Part Number Information
on page 55
on page 57
910-2969-001 Revision K, June 2009
Hardware Manual