Figure 8: T1100 As Chassis Label Locations; Figure 9: Base Unit/Hard Disk Label Ont1100 As Chassis - Tekelec 1100 Hardware Manual

Hardware Manual
10. Secure the chassis with one # 12-24 screw in the chassis retention brackets on each side.
11. This procedure is complete.
Hard Disk Drive Assembly Part Number Information
The part number information for hard disk drive assemblies is located on both of the following
labels:
Label on the hard disk drive assembly (see
on page 122).
Use this label during replacement of the part to verify that the correct part number was ordered
How to Replace Hard Disk Drive Assemblies
(see
The Base Unit/Hard Disk Drive Label on the outside of theT1100 AS chassis.
AS Chassis Label Locations
Unit/Hard Disk Label onT1100 AS Chassis
label when requesting an RMA. The steps shown below provides instructions about how to
access view this label.

Figure 8: T1100 AS Chassis Label Locations

Figure 9: Base Unit/Hard Disk Label onT1100 AS Chassis

910-2969-001 Revision K, June 2009
Figure 72: Hard Disk Drive Label onT1100 AS Chassis
on page 118).
on page 19 shows where this label is located and
on page 19 shows a closeup view of a label. Use this
About This Manual
Figure 8: T1100
Figure 9: Base
19