Table of Contents
Advertisement
About This Manual
Figure 3: Fan Part number labels
4.
Figure 3: Fan Part number labels
5. Close the chassis front top cover.
6. Tighten the screws to secure the top cover.
7. From the front of the frame, simultaneously press the round release buttons and slowly push
the chassis into the frame while observing the cables to avoid binding or stretching.
Note: When the chassis stops moving, the front of theT1100 AS should be slightly recessed to
allow clearance behind the frame door when closed.
8. Adjust the chassis retention brackets on the front of theT1100 AS chassis to contact the frame
adapter brackets when the chassis is positioned correctly in the frame.
9. Secure the chassis with one # 12-24 screw in the chassis retention brackets on each side.
16
on page 16 shows the location of the fan assembly part label.
Hardware Manual
910-2969-001 Revision K, June 2009
Advertisement
Table of Contents
