Table of Contents
Advertisement
Hardware Manual
Table 10: Basic Interfaces
that use theT1100 AS platform.
Table 11: Optional Interfaces (on PCI Cards)
be added, using PCI cards, depending on product application.
Table 10: Basic Interfaces
Interface
PCI Slots
Serial interfaces
USB ports
External timing interface
Ethernet
Table 11: Optional Interfaces (on PCI Cards)
Interface
Ethernet
910-2969-001 Revision K, June 2009
on page 139shows the basic interfaces supplied to all implementations
on page 139 shows additional interface types that can
Description
Eight Peripheral Computing Interface (PCI)
expansion slots can accommodate
Tekelec-designed or commercial-off-the-shelf
(COTS) expansion modules (seven available).
A standard RS-232D serial interface is usually
used for connecting to other equipment.
Additional serial interfaces can be added
optionally (see
PCI Cards)
Two Universal Serial Bus (USB) ports to support
direct connectivity to peripherals. The USB ports
are accessible from the rear.
External timing interface for synchronizing
operations with network timing standards, as
required for specific configurations. This timing
interface may be implemented on Signaling Link
modules as applicable.
The Tekelec 1100 AS has four Ethernet ports of
10Mbps, 100Mbps, or 1Gb operation as needed
for specific product configurations.
Description
The Tekelec 1100 AS platform can support
Ethernet ports of 10Mbps, 100Mbps, or 1Gb
operation as needed for specific product
configurations. Each PCI slot can support a
qualified Ethernet card that can support two
Ethernet ports (although it is not typical that all
PCI slots contain Ethernet cards).
T1100 AS Hardware Feature Information
Table 11: Optional Interfaces (on
on page 139).
139
Advertisement
Table of Contents
