Table of Contents
Advertisement
Safety and Pre-Installation Requirements
Note: Use a minimum of 26 AWG telecommunications line cord for connection to the modem.
Regulatory Compliance and Certification
Tekelec products are tested to meet the following regulatory standards:
Network Equipment Building System (NEBS) level 3 as listed in Telcordia SR-3580.
Applicable Telcordia Electromagnetic Compatibility and Electrical Safety requirements in
GR-1089-CORE.
Applicable Physical Protection requirements in GR-63-CORE.
Relevant directives and harmonized standards in support of the products Compliance European
(CE) mark required in Europe.
mark used to indicate this compliance.
Figure 20: European Directives CE Mark
Requirements of RTTE Directive 1999/5/EC, Radio Telecommunications Terminal Equipment,
as tested to the relevant standards identified in the Official Journal of the European
Communities.
on page 32 show the marks used to indicate this compliance.
Figure 21: Combined UL and GS Mark
Figure 22: UL-Demko Mark
Relevant standards in ElectroMagnetic Compatibility (EMC) directive 89/336/EEC.
Relevant standards in Safety directive 73/23/EEC, supported by Certified Body (CB) Test
Certificates US/5923/UL or US/5451/UL issued by the National Certification Body as tested
to IEC 60950 with national differences for European countries
Underwriters Laboratories (UL) listed under UL File E200146 for USA and c-UL for Canada.
Figure 23: Combined UL Mark for the United States and Canada
to indicate this compliance.
Figure 23: Combined UL Mark for the United States and Canada
32
Figure 20: European Directives CE Mark
Figure 21: Combined UL and GS Mark
on page 32 shows the
on page 32 and
Figure 22: UL-Demko Mark
on page 32 shows the mark used
910-2969-001 Revision K, June 2009
Hardware Manual
Advertisement
Table of Contents
