How To Anchor The Hd Frame To The Floor; Figure 35: Anchor Assembly For Slab Floors - Tekelec 1100 Hardware Manual

Application server
Hide thumbs Also See for 1100:
Table of Contents

Advertisement

Hardware Manual
corresponding to the marked anchor locations. Use a file to remove any sharp edges from the
drilled tiles.
5. Return to the equipment area with the drilled tiles and replace the tiles, making sure the holes
match where the frame anchors will be installed.
6. You have completed this procedure.
Next, perform one of the following procedures, depending on the anchoring method you choose:
How to Anchor to Concrete Floor Under a Raised Floor
How to Anchor on Raised Floor Using Support Channel
How to Anchor on Raised Floor Using Support Channel with Spring Nut

How to Anchor the HD Frame to the Floor

See the following sections for instructions on anchoring heavy duty frames to the floor. These
procedures are for typical installation sites with slab (concrete) floors and raised floors. You might
have to accommodate these procedures to the unique features of your site. Depending upon your
floor, use the procedure in one of the following sections:
Anchoring directly to a slab floor (see
Anchoring to a slab floor beneath a raised floor (see
Raised Floor
on page 60)
Anchoring to a raised floor using washer and nut (see
Support Channel
Anchoring to a raised floor using a unistrut (see
Channel with Spring Nut
WARNING: Before drilling holes in any flooring, verify with facilities personnel
that the area is free of gas or water pipes, ventilation plenum, and electrical wiring
conduits.
How to Anchor Frame to Slab Floor
Use the procedure in this section to
are anchoring to a raised floor above a slab floor, see
Floor
on page 60. Always get permission from facility personnel before drilling any holes for HD
frame installation.

Figure 35: Anchor Assembly for Slab Floors

used for a slab floor.
Figure 35: Anchor Assembly for Slab Floors
910-2969-001 Revision K, June 2009
How to Anchor Frame to Slab Floor
on page 63)
on page 65)
anchor the frame directly to a concrete slab floor. If you
on page 57 shows the components of the Anchor Assembly
How to Install aT1100 AS Frame
on page 60
on page 63
on page 65
How to Anchor to Concrete Floor Under a
How to Anchor on Raised Floor Using
How to Anchor on Raised Floor Using Support
How to Anchor to Concrete Floor Under a Raised
on page 57)
57

Advertisement

Table of Contents
loading

Table of Contents