SeeMeCNC Rostock MAX v2 Assembly Manual page 305

The Ratio field allows you to shrink or grow an entire model by a specific percentage. For
example, if you were to change the Ratio from 1 to 1.5, you'd see this:
The scaling operation made the cube 150% larger than the original. The X, Y, and Z fields
allow you to specify exact dimensions. However, as long as the Lock Ratio field is checked, any
change made to those fields will adjust the others to maintain the same ratio.
The Shaded, Outlines, and
Polygons options allow you to change how
your objects are drawn. By default the
Shaded option is checked. For most parts
this is fine, but if you'd like to see detail
that the solid shading can hide, click
Outlines. Models used for 3D printing are
built out of a few up to many thousands of
polygons. If you'd like to see what the
polygons look like that make up your model, click the Polygons option.
Rostock MAX v2 Assembly Guide
The Mirror function will simply allow you to "mirror" the object along
any of the three axes. Note that mirroring the Z axis will flip the part upside
down, so be careful.
The Display function allows you to modify how the 3D View pane
operates. Show Print Bed is pretty obvious. Uncheck it and see what happens!
Shop Print Area is handy when you want to see exactly how much space your
parts are going to take up. When selected, it will display a shadowed cylinder
that encapsulates the maximum bed diameter and print height, as show below.
Become
this:
305