SeeMeCNC Rostock MAX v2 Assembly Manual page 281

You'll notice that the display will scroll as new information comes in from the Orion. This is
how MatterControl is able to continually update things like the temperature displays. In order to be
able to use the terminal for basic tasks, you'll need to click on the Filter Output check box that's at the
upper left corner of the window. This will filter out the telemetry information coming from the Orion's
controller and allow you to directly interact with the printer without having the output interleaved with
the periodic information that the Rostock MAX transmits.
Fig. 24-7: Cloud Settings.
MatterControl provides the ability to remotely monitor your Rostock MAX printer from
anywhere in the world. To learn more about this service, click on the MORE INFO link in
MatterControl.
Fig. 24-8: Notification Settings.
By default, MatterControl will play a bell sound when the current active print job completes.
However, you can change this behavior via the Notification Settings configuration screen. You'll be
able to configure MatterControl to send you an email or text message when your printer completes a
job. Note that this feature is only available when you're using MatterControl to run a print job. If
you're printing from the SD card, notification won't be possible.
The
Update
Fig. 24-9: Notification options.
Fig. 24-10: Keeping current.
Rostock MAX v2 Assembly Guide
281