SeeMeCNC Rostock MAX v2 Assembly Manual page 21

Rostock MAX v2 Assembly Guide
Rostock MAX v2 Electronics and Hardware Pack #4
(___) (1) RAMBo Electronic Control Board with screw terminals and
end stop wires. [84392]
(___) (1) USB Cable.
(___) (1) Onyx Heated Bed Kit.
(___) (1) LCD Smart Controller with SD card, LCD to RAMBo
Adapter Kit and 1 Soft Touch 5mm knob.
(___) (4) NEMA 17 Stepper Motors (4800cgm holding torque). Used
for three motion axes and extruder drive.
(___) (1) Rocker switch, including spade lug crimp terminals.
(___) (1) 25x25x10mm 12VDC fan. Used to cool the PEEK section
on the hot end.
21