SeeMeCNC Rostock MAX v2 Assembly Manual page 10

The following is a list of optional things that can make your life easier in the long run.
•
Electrician's tape.
•
Standard sized nylon wire ties.
•
Waxed lacing cord. You can use this in place of wire ties in pretty much any application. You
can find it here: http://www.skygeek.com/wht-string.html. While expensive, you'll never really
need to buy a wire tie again and it'll likely last you the rest of your life. :)
I'd also recommend a little plastic box with part compartments in it. They're really cheap at
craft stores and are perfect for building a kit like this – you can store all the various fasteners and have
them ready to go as you need them. Here's the one I use for my various projects:
Rostock MAX v2 Assembly Guide
10