SeeMeCNC Rostock MAX v2 Assembly Manual page 245

Once the Presets Editor opens,
simply click on Save to commit the changes
you just loaded. This will dismiss the
Presets Editor and you can then click Close
on the Quality Presets window.
Now click on the Toolbox
icon for the MATERIAL column.
Fig. 20-5: Materials Toolbox.
You're going to follow the same steps you did for the QUALITY preset, but this time you're
going to go into the MATERIALS directory and import the file named "ABS.slice". This will bring in
the defaults needed for your first print with ABS. You might also want to load the PLA configuration at
this time.
Rostock MAX v2 Assembly Guide
Fig. 20-4: Presets Editor.
Fig. 20-6: Material presets loaded!
245