Operator Control (Hardware); Overview Of Operator Control And Display Elements - Siemens SIMOTION D4 5 Series Manual

Operator control (hardware)

2.1

Overview of operator control and display elements

The following figure shows the arrangement of the operator control and display elements of a
SIMOTION D4x5.
Figure 2-1
The operator control and display elements are described in detail below.
The arrangement of the operator control and display elements will depend on the specific
SIMOTION D4x5 device version.
SIMOTION D4x5
Manual, 02/2012
Position of operator control and display elements
2
33