Wiring Up; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Wiring up

3.1

Wiring and block diagram

This section includes the block diagram of the AI 8xI 2-/4-wire BA module with the terminal
assignments for 2-wire and 4-wire connection.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
You may use and combine the different wiring options for all channels.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
10
Analog input module AI 8xI 2-/4-wire BA (6ES7134-6GF00-0AA1)
3
Manual, 03/2015, A5E34941201-AA