Accessing The Generated User Account Password; Turning On The Projector With Low Voltage; Resuming Projector Operation After An Ac Power Interruption - Christie Boxer 4K Series User Manual

Create your password using 4 to 32 characters. The password can be any combination of
letters, numbers, and symbols (ASCII-standard characters only). Accents and accented
characters are not supported.
4. Select Confirm and re-enter your new password.
5. Select Apply.

Accessing the generated user account password

If the user account password is not available, the generated password can be used to access the
functionality on the web interface.
Note the following about the generated user account password:
• The generated password can be used to change the user account password.
• Every time the user account password is updated, the generated password is changed.
• If the projector defaults are reset using either the Reset Projector Defaults or Reset
Factory Defaults features, the user account password is reset.
This feature is accessed from the display panel on the projector and the on-screen display.
1. From the display panel, select MENU > Admin > Service.
2. Enter the service password.
3. Select Generated password.
The generated password is displayed in this field.

Turning on the projector with low voltage

Enable the projector to turn on even if the AC mains voltage is below specification.
1. From the display panel, select MENU > Admin > Service.
2. Enter the service password.
The password is only required for the display panel and not the web user interface.
3. Select Ignore Low AC Input Voltage Error.
4. To ignore the Low AC Input Voltage error when turning on the projector, select Enter.
Resuming projector operation after an AC power
interruption
If an AC power interruption occurs while Auto Power Up is enabled, the projector will resume operation
in the same state it was prior to the loss of power.
1. Select MENU > System Settings > Power Settings.
2. Select Auto Power Up.
3. To enable automatically powering up the projector after an AC interruption, select Enter.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
37