Emulating An Edid To All Input Ports; Copy An Edid To User Memory; Deleting An Edid From User Memory; Resetting The Emulated Edids - Lightware HDMI-3D-OPT-TX210A User Manual


  
7. LW3 Programmer's Reference
7.12.5. Emulating an EDID to All Input Ports
Command format: CALL●/EDID:switchAll(<source>)
Response format: mO●/EDID:switchAll
Example:
˃ CALL /EDID:switchAll(F47)
˂ mO /EDID:switchAll
Legend: <source> Source EDID memory place: Factory / User / Dynamic.
7.12.6. Copy an EDID to User Memory
Command format: CALL●/EDID:copy(<D
Response format: mO●/EDID:copy
Example:
˃ CALL /EDID:copy(D1:U1)
˂ mO /EDID:copy
Explanation: The EDID of the last connected sink of D1 (Output 1) has been copied to U1.
7.12.7. Deleting an EDID from User Memory
Command format: CALL●/EDID:delete(<U
Response format: mO●/EDID:delete
Example:
˃ CALL /EDID:delete(U1)
˂ mO /EDID:delete
7.12.8. Resetting the Emulated EDIDs
Command format: CALL●/EDID:reset()
Response format: mO●/EDID:reset
Example:
˃ CALL /EDID:reset()
˂ mO /EDID:reset
Explanation: Calling this method switches all emulated EDIDs to factory default one. See the table in the
Factory EDID List section.
>|<E >|<F >|<U >:<U >)
n n n n m
>)
n
HDMI-3D-OPT series – User's Manual 73