7.LW3Programmer'sReference
7.13.6. Copying an EDID to the User Memory
Command and Response
CALL·/EDID:copy(<source>:<user_mem>)
mO·/EDID:copy
Parameters
Identifier
Parameterdescription
<source>
Source EDID memory place:
Factory/User/Dynamic.
<user_mem>
The destination EDID memory
location.
Example
CALL/EDID:copy(D1:U1)
mO/EDID:copy
7.13.7. Deleting an EDID from User Memory
Command and Response
CALL·/EDID:delete(<user_mem>)
mO·/EDID:delete
Parameters
The <user_mem>is the location of the EDID to be deleted.
Example
CALL/EDID:delete(U1)
mO/EDID:delete
7.13.8. Resetting the Emulated EDIDs
CallingthismethodswitchesallemulatedEDIDstothefactorydefaultone.SeethetableintheFactory EDID
List
section.
Command and Response
CALL·/EDID:reset()
mO·/EDID:reset
Example
CALL/EDID:reset()
mO/EDID:reset
Parametervalues
D1-D#: dynamic EDIDs
U1-U#:UserEDIDs
F1-F#:FactoryEDIDs
U1-U#:UserEDIDmemorylocation
SeetheWiringGuideforRS-232Data
Transmission
section.
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
92