The Total Number Of Horizontal Dots; Start Position; Active Area - IDK MSD-501 User Manual

7.7.2 The total number of horizontal dots

Menu Top→INPUT TIMING→H TOTAL DOTS
Setting for Each input/input signal
Setting value 400DOT to 4125DOT (sampling block must be within 13 MHz to 162 MHz)
[Default] varies depending on the input signal.
You can set the total number of horizontal dots of analog RGB/analog YPbPr input video.
If other signal is input, the total number only can be displayed but not set.

7.7.3 Start position

Menu Top→INPUT TIMING→H START (Horizontal) / V START (Vertical)
Setting for Each input/input signal
Setting value
Function
Horizontal start position
Vertical start position
[Default] varies depending on the input signal.
You can set the horizontal/vertical starting position.
Setting value must be as follows. If the set value exceeds the value, the starting position will be set the limit
value within the settable range automatically.
Horizontal : The total number of horizontal dots > Horizontal active area > Horizontal starting position
Vertical : The total number of vertical lines > Vertical active area > Vertical starting position

7.7.4 Active area

Menu Top→INPUT TIMING→H DISPLAY (Horizontal) / V DISPLAY (Vertical)
Setting for Each input/input signal
Setting value
Function
Horizontal active area
Vertical active area
[Default] varies depending on the input signal.
You can set the horizontal/vertical active area of input video.
The horizontal setting value must be [The total number of horizontal dots > Horizontal active area]. If the set
value exceeds the limit value by changing the total number of horizontal dots, the horizontal active area will be
set to the limit value within the set range automatically.
64DOT to 2900DOT (The total number of horizontal dots－Horizontal
active area or less)
10LINE to 2048LINE (The total number of vertical lines－Vertical active
area or less)
64DOT to 2900DOT (The total number of horizontal dots－64 or less)
10LINE to 2048LINE (The total number of vertical lines－10 or less)
MSD-501/502/701/702 User's Guide
Setting value
Setting value
47