Table of Contents
Advertisement
MSD-72 Series User's Guide
9.6.4 Active area
Top → INPUT TIMING → H DISPLAY (Horizontal) / V DISPLAY (Vertical)
Menu
Setting for
Each input channel, each input signal
Setting value [Table 7.26] Settings of active area
Function
Horizontal active area
Vertical active area
[Default] varies depending on the input signal.
You can set the horizontal/vertical active area of input video.
The horizontal setting value must be [The total number of horizontal dots > Horizontal active area]. If the set
value exceeds the limit value by changing the total number of horizontal dots, the horizontal active area will be
set to the limit value within the set range automatically.
If there is no input signal on the input channel it shows "NOT AVAILABLE NOW" on the front VFD screen.
70
[Table 9.6] Settings of active area
64DOT to 2900DOT (The total number of horizontal dots－64 or less)
10LINE to 2048LINE (The total number of vertical lines－10 or less)
Setting value
Advertisement
Table of Contents
