Fixing Settings For Each Input Signal - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.7.7 Fixing settings for each input signal

Menu Top→INPUT SETTING→INPUT TABLE FIXED
Setting for Each input channel
Setting value
Setting mode:
・SELECTED
・ALL FIXED
Individual setting (if "SELECTED" is selected for the setting mode):
・ASPECT
・ANALOG TYPE : OFF, ON(FIXED) [Default] 【See: 9.7.3 Analog input signal parameters】
・AUDIO LEVEL : OFF, ON(FIXED) [Default] 【See: 9.10.4 Audio input level】
The MSD continuously monitors the input signals. If a particular input signal that has been presented to the
MSD before is input again, the MSD will output the signal at the same size and quality as its previous use.
You can select the setting saved for each signal or the current setting.
"ALL FIXED": Does not load all settings saved for each input signal but outputs the video with the current
setting.
"SELECTED": Aspect ratio, analog input signal type and audio input level can be set individually. For setting
items other than settings in "[Table 9.1] Attributes saved for each input signal", settings saved for each
input signal are used.
"OFF": Settings saved for each input signal are used to format the video output.
"ON (FIXED)": Current settings are used to format the video output.
[Table 9.7] Individual settings for each digital or analog signal
*IN7 and IN8: Digital and analog input signals can be accommodated.
For signal selection, see "9.7.5 Selecting signal of DVI input connector".
82
: Sets for each item [Default]
: Does not load settings saved for each input signal but fixes the current settings
: OFF [Default], ON(FIXED) 【See: 9.4.3 Aspect ratio】
Digital signal
Individual setting
ASPECT
ANALOG TYPE Cannot be set
AUDIO LEVEL
【See: 9.2 Input signal automatic detection】
Analog signal
*
(IN1 to IN8 ) (IN7 and IN8
Can be set Can be set
Can be set
Can be set Cannot be set
*
)