Input Settings - IDK MSD-72 Series Command Reference Manual

@ODC
Setting Command
Response
Parameter
Setting Command
example Response
Description
Remarks

3.3.6 Input settings

@GDT / @SDT
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Output default color
@ODC, ch_1 (, ch_2･･･)
@ODC, ch_1 (, ch_2･･･)
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@ODC,1
@ODC,1
Initializing OUT1 image quality settings.
brightness
@GOB / @SOB Output
contrast
@GOC / @SOC Output
－
No-signal-input monitoring
@GDT
@GDT, time_1, time_2, time_3, time_4, time_5, time_6, time_7, time_8, time_9
@SDT, ch_1, time_1 (, ch_2, time_2･･･)
@SDT, ch_1, time_1 (, ch_2, time_2･･･)
time_1-9: No-signal-input monitoring
0 = OFF, 2000 = 2 sec to 15000 = 15 sec [Default] 10000 = 10 sec
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits,
these values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900 ms.)
ch_1-9: Input channel
0 = All digital inputs, 1 = IN1 to 9 = IN9
@GDT
@GDT,6000,10000,10000,4000,4000,4000,4000,4000,4000
Getting the set monitoring time of input video signal.
IN1: 6000 ms. (6 sec.), IN2 and IN3: 10000 ms. (10 sec.), IN4 and IN9: 4000
ms. (4 sec.)
@SDT,3,6000
@SDT,3,6000
Setting the monitoring time of IN3 to 6000 ms. (6 sec.).
These commands are only for digital input.
IN8 and IN9 are available only if "1" (Digital signal). is selected for "@GIN /
@SIN". If "0" (Analog signal) is selected, "-1" is returned.
MSD-72 series Command Guide
39