Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
@ODC
Setting
Command
Response
Parameter
Setting
Command
example
Response
Description Initializing OUT1 image quality settings.
Remarks
3.3.5 Input settings
@GDT / @SDT
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description
Setting
Command
example
Response
Description
Remarks
36
Output default color
@ODC, ch_1 (, ch_2)
@ODC, ch_1 (, ch_2)
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@ODC,1
@ODC,1
@GOB / @SOB Output
@GOC / @SOC Output
－
No-signal-input monitoring
@GDT
@GDT, time_1, time_2, time_3, time_4, time_5, time_6, time_7,time_8
@SDT, ch_1, time_1 (, ch_2, time_2)
@SDT, ch_1, time_1 (, ch_2, time_2)
time_1-8: No-signal-input monitoring
0 = OFF, 2000 = 2 sec to 15000 = 15 sec [Default] 10000 = 10 sec
Set the value by 100 ms. If you set a value other than 0 for the lower 2 digits, these
values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2900 ms.)
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
@GDT
@GDT,6000,10000,10000,4000,4000,4000,4000,4000
Getting the set monitoring time of input video signal.
IN1: 6000 ms. (6 sec.), IN2 and IN3: 10000 ms. (10 sec.),
IN4 and IN8: 4000 ms. (4 sec.)
@SDT,3,6000
@SDT,3,6000
Setting the monitoring time of IN3 to 6000 ms. (6 sec.).
These commands are only for digital input.
IN6 and IN7 are available only if "1" (Digital signal) is selected for "@GIN / @SIN
Signal selection of DVI input connector". If "0" (Analog signal) is selected, "-1" is
returned.
brightness
contrast
Advertisement
Table of Contents
