Automatic Detection Of Input Video Interruption [Input Off Check] - IDK msd-804fd User Manual

7.5.4

Automatic detection of input video interruption [INPUT OFF CHECK]

The MSD can stop outputting video immediately after input video signals are disconnected for a moment.
Use this function to reduce distorted output video occurred at the time of switching if an external switcher is
connected for input of the MSD. The processing of this function is the same as that of switching input.
(Settings of the following menus are applied automatically: "7.7.5 Window transition effect [VIDEO
SWITCHING]", "7.7.6 Window transition speed [SWITCHING SPEED]", and "7.7.7 Wipe color [WIPE
COLOR]".
･ Not detect automatically: OFF
･ Detect automatically: ON [Default]
Note 1:
Even if you set this item to "ON", distorted video cannot be corrected completely when input video signals are
lost. Especially if you set "7.7.5 Window transition effect [VIDEO SWITCHING]" to an option other than
"CUT", noises or black bars may be output at the time of fading out or wiping out.
1. To enable/disable the automatic detection using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
INPUT SETTING
↓ SET key
[INPUT SETTING]
INPUT OFF CHECK
↓ SET key
[IN1 OFF CHECK]
ON
↓ ESC key: Returns to the previous screen.
2. To enable/disable the automatic detection using commands:
@SID: Set automatic detection of input video interruption
@GID: Get automatic detection of input video interruption
Top
▲▼keys: Select "INPUT SETTING".
▲▼keys: Select "INPUT OFF CHECK".
▲▼keys: Select "ON" or "OFF".
◄►keys: Select the desired input (IN1 to IN8).
88
MSD-804FD User's Guide
For each input