Automatic Detection Of Input Video Interruption; Selecting Signal Of Dvi Input Connector - IDK MSD-501 User Manual

7.6.5 Automatic detection of input video interruption

Menu Top→INPUT SETTING→INPUT OFF CHECK
Setting for Each input
Setting value ON [Default], OFF
The MSD can stop outputting video immediately after input video signal is disconnected for a moment.
Use this function to reduce distorted output video occurred at the time of switching if an external switcher is
connected for input of the MSD. The processing of this function is the same as that of switching input.
・7.8.5 Window transition effect
・7.8.6 Window transition speed
・7.8.7 Wipe color
If you select "ON" and input video (VHS tapes or the like) that has a bad record condition, outputting video will
be ON/OFF repeatedly due to distorted synchronous idles. In this case, set this menu to "OFF".
Even if you set this item to "ON", distorted video cannot be corrected completely when input video signal is
lost. Especially if you set "7.8.5 Window transition effect" to an option other than "CUT", noises or black bars
may be output at the time of fading out or wiping out.

7.6.6 Selecting signal of DVI input connector

Menu Top→INPUT SETTING→INPUT5 TYPE
Setting value DIGITAL [Default], ANALOG
* This menu is only for MSD-701/702.
MSD-501/502/701/702 User's Guide
43